<bdo id="m8sa2"><input id="m8sa2"></input></bdo>
  • <samp id="m8sa2"><tfoot id="m8sa2"></tfoot></samp>
    <strike id="m8sa2"><menu id="m8sa2"></menu></strike>
    <samp id="m8sa2"><tfoot id="m8sa2"></tfoot></samp>
    • <ul id="m8sa2"></ul>
    • <samp id="m8sa2"><tbody id="m8sa2"></tbody></samp>
    • <ul id="m8sa2"></ul><samp id="m8sa2"><tfoot id="m8sa2"></tfoot></samp><blockquote id="m8sa2"><tfoot id="m8sa2"></tfoot></blockquote>
      <samp id="m8sa2"></samp>
      Hotline: +86-021-57278880
      Language:   
      Your current location: ProductsRegulating ValveElectronic Electric Single Seat Regulating Valve

      ZDLP Electronic Electric Single Seat Regulating Valve

      Product overview

      Product model: ZDLP
      Nominal diameter: DN25~200mm
      Nominal pressure: PN1.6~6.4MPa
      Ambient temperature: -25~+70℃
      Ambient humidity: ≤95%
      Body material: cast steel (ZG230450), stainless steel (ZGICR18Ni9Ti, ZGICR18Ni12M02Ti), etc
      Drive mode: electric
      Design standard: GB/T17213
      Inspection standard: GB/T4213
      Flange standard: JIS B220, JB/T79, ANSI B16.5-1981, GB/T9113, HG20594-97, HG20618-97, etc

      ZDLP Electronic Electric Single Seat Regulating Valve product details

      ZDLP Electronic Electric Single Seat Regulating Valve technical parameter

      Body
      form Straight through the single seat cast ball valve
      Nominal diameter 25, 32, 40, 50, 65, 80, 100, 1 25, 150, 200 mm
      Nominal pressure PN16, 40, 64 bar
      Flange standard JB / T79.1-94,79.2-94 and so on
      material Cast steel (ZG230450), stainless steel (ZGICr18Ni9Ti, ZGICr18Ni12M02Ti), etc.
       On the bonnet Standard type: -17 ~ 230 ℃ Cooling type: 230 ~ 450 ℃
      Low temperature type: -60 ~ 196 ℃ Bellows Sealed: -40 ~ 350 ℃
      Cover form Bolt compression type
       filler V-type PTFE filler, PTFE impregnated asbestos filler, asbestos textile filler, graphite filler


      Valve assembly
      Spool type Single-seat spool valve
      Flow characteristics Equal percentage characteristics and linear characteristics
      Material Stainless steel (1Cr18Ni9Ti, 1Cr18Ni12M02Ti, 17-4PH, 9Cr18, 316L),
      stainless steel heap too Lai Lai alloy, titanium and corrosion-resistant Taiwan gold.


      Execution agency
       Type 381 LSA-08 381 LSA-20 381 LSB-30 381 LSB-50 381 LSC-65 381 LSC-99 381 LSC-160
      Piston diameter 381 LXA-08 381 LXA-20 381 LXB-30 381 LXB-50 381 LXC-65 381 LXC-99 381 LXC a 160
      Output push (N) 800 2000 3000 5000 6500 10000 16000
      The maximum travel L (mm) 30 60 100
      Working speed (mm / s) 4.2 2.1 3.5 1.7 2.8 2.0 1.0
      The main technical parameters Power supply voltage: 220W50Hz Input signal: 4-20mA or 1-5V. DC output signal: 4-20mA. DC
      Protection class: quite IP55 Flameproof mark: Exd || BT4 Hand control function: handle
      Ambient temperature: -25 ~ +70 ℃ Humidity: ≤ 95%


      performance
      Project Without locator With locator
      Basic error% ± 5.0 ± 1.0
      Backlash% ≤3.0 ≤1.0
      dead zone% ≤3.0 ≤0.4
      Always point deviation% Open air Start point ± 2.5 ± 1.0
      end ± 5.0 ± 1.0
      Qi off Start point ± 5.0 ± 1.0
      end ± 2.5 ± 1.0
      Rated travel deviation% ≤2.5
      Leakage 1 / h 0.01% X valve rated capacity
      Adjustable range R 30: 1


      Rated flow coefficient Kv, rated travel, equipped with actuator type, allowing pressure
      Nominal diameter DN (mm) 25 32 40 50 65 80 100 125 150 200
      Seat diameter DN (mm) 25 32 40 50 65 80 100 125 150 200
      Rated flow coefficient Kv 8 13 22 32 50 80 120 200 280 450
      Travel L (mm) 16 20 40 60
      Equipped with actuator model 381 LS / XA-20 381 LS / XA-30 381 LS / XA-50 381 LS / XA-65
      Allowable pressure difference (bar) 30 20 18 20.5 11.6 6.7 4.7 3.9 2.6 1.6

      Note: The bellows seal control valve, the maximum allowable pressure of 10bar, the table if the value is less than 10bar unchanged, if more than 10bar then take l0bar.


      ZDLP Electronic Electric Single Seat Regulating Valve dimensions and weight   unit: mm

      Nominal diameter 25 32 40 50 65 80 100 125 150 200
      L PN16 / 40 185 200 220 250 275 300 350 410 450 550
      PN64 200 210 235 265 295 320 370 440 475 570
      D 255 255 255 255 255 255 255 310 310 310
      R 177 177 177 177 177 177 177 226 226 226
      H1 PN16 / 40 155 175 180 200 235 250 260 330 350 420
      PN64 165 185 185 205 245 255 270 335 365 430
      H3 PN16 / 40 171 195 200 220 262 277 287 357 377 447
      PN64 181 205 205 225 272 282 297 362 392 457
      H2 373 495 495 495 700 700 700 725 725 725
      H4 459 459 459 459 520 520 520 570 570 570
      H5 PN64 120 120 140 145 190 210 220 270 280 320
      Weight 
             (KG)
      PN16 / 40 16 19 22 23 39 50 59 80 87 115
      PN64 21 24 31 33 49 75 92 129 137 170

      Note:

      1, the other structural dimensions refer to ZJHP pneumatic diaphragm single seat control valve.

      2, the table weight with the use of PSL-type actuator data.     

      3, valve flange and flange end distance can be manufactured according to user-specified standards, such as: ANSI, JIS, DIN standards.



      Reminder:

      All text, data and pictures in this article are for reference only.To see more details of the ZDLP Electronic Electric Single Seat Regulating Valve performance parameters, structural dimension parameters, pricing, etc., or to request high quality printing samples, please Contact us.

      +86-021-57278881
      qrCode
      <bdo id="m8sa2"><input id="m8sa2"></input></bdo>
      • <samp id="m8sa2"><tfoot id="m8sa2"></tfoot></samp>
        <strike id="m8sa2"><menu id="m8sa2"></menu></strike>
        <samp id="m8sa2"><tfoot id="m8sa2"></tfoot></samp>
        • <ul id="m8sa2"></ul>
        • <samp id="m8sa2"><tbody id="m8sa2"></tbody></samp>
        • <ul id="m8sa2"></ul><samp id="m8sa2"><tfoot id="m8sa2"></tfoot></samp><blockquote id="m8sa2"><tfoot id="m8sa2"></tfoot></blockquote>
          <samp id="m8sa2"></samp>